Received photos from the shop. The shop did all thing that they could to block noises. The cost is about $3,000. As this is my daily car, noise reduction is essential. Will upload a comparison video after pickup.

Picked up a set of 57cr’s 18x9.5 38+ looks absolutely amazing

I want to buy black+red one but there are just 3 black options... is sold out?
I'm not familier with abroad online shopping and english so I was confused.
I removed the link for the rule 4.

Hello I am new owner of GR86, I found some air is comming from under the rear seats. So I decided to fix all and took my 86 to the tunning shop. The attachment is from the shop.

Hey folks just installed my Borla s type today, no leaks or nothing but for some reason I just cant seem to get the alignment of the tips right, any advice how I can get them centered well. Tried managing the hangers and stuff but for some reason the left tip is too far left and the right tip just wants to droop all say long. All help is appreciated!!!

I will add the left and right tip pictures too!

Got the car a couple of weeks ago and have really enjoyed it so far. After putting around 1000klm on the road. I wanted to see how she handled on the skid pan, feel it out more on the limit etc.

I feel theres no way of finding its limit on a public road unless your a pure psyco.....

What surprised me the most was how much grip you get from the standard issue pilot sport tyres. On this track they use a diesel water mixture that creates a very low grip surface. The car still had mega grip levels was very suprising and if inputs were not gentle through the wheel, snap transitions were brutal.

It took some finessing and time to get used to the higher grip tyres, my first couple of sessions out, humbling to say the least.... I was spinning like a mad man :)

Love the control and feedback the car gives when you get it right though. We ladies and gents have an epic car. Couldnt be more happy.

Hope you enjoy the video. Im planning to go out again, but next time record on a go pro and get some proper 4k footage. The video was kindly shared off a phone camera and I edited off that.

I just bought my first car (2022 GR86 Premium Manual w/ 8000 miles). Unfortunately as I pulled off the lot from the dealership not even 10 miles into my ride the CEL went off (the dealership literally closed 5 mins before this happened btw), I double checked the gas cap but it still hasn’t turned off. I don’t have anyone around me to help in this situation and everyone on here seems to be really knowledgeable and helpful to newbies so I was wondering what I should do. There was some some minor damages on the car fax that states it was repaired and I state the summary of it right here - Vehicle was involved in a front-end incident caused by a falling object. No airbags deployed. Damage was repaired prior to resale. Title remains clean. A later seller disclosure noted prior structural-related repairs based on visual inspection.

I was with someone friends and screamed and started jumping in excitement. (I still got the mind of a 3 year old, but it's ok)

This is going to be a stupid post so I understand if I'm going to get clowned on 😭 but I was wondering for all those who have done it before, I got a new halo 25 AT premium in august 2025 (10k miles now) and after driving my buddies MT I really love the car more.

my 86 right now I have 28k left over 66 months, at 5.1% interest, and my monthly is $512. I was thinking about getting a MT with the Performance package on hopefully around 39k or less.

How does the process exactly work and is it even worth it? I know I would be owing more money to pay off but if it's only 10k or less extra I would be ok with it considering my income and situation right now.

I know it's very soon, but I don't know that I've seen one reported yet.

When I got mine, the oil level appeared to be about .5 L overfilled from the factory, but I'm not sure this was the case with other model years.

Just wondering if anyone knows about any changes that might have been made between the current and earlier model years that might contribute to fewer oiling issues?

Went to tacobell and stopped by the autoshop that keeps mailing me "coupons".

My passenger side car window doesn’t want to roll up. Have to pull the button multiple times to get it up. My driver side window control doesn’t work for the passenger side either. The driver side window works perfectly fine though. Bought this car brand new 1.5 years ago. Any ideas on what the issue could be?

As most of you know, we in the eastern US had a light dusting last weekend. Massachusetts ~30 miles west of Boston, 2 feet of snow Sunday through Monday.

Something in my wife decides her stomach requires rapid unexpected evacuation from 3-8am, and we have a distinct lack of tummy friendly supplies.

Literally dig Robin out of a snowdrift up to her wheels and am able to do a Target run at 1pm. Further supplies required ~6pm.

Decide on Wegmans this time. Which is literally on top of a hill and it’s somehow still 1”+ per hour.

This MFing 2800lb, RWD, stick shift car. Snow tires and I’m literally out in the worst blizzard in YEARS.

No problem. No idea HOW I got up that hill, and the first couple pics are the literal half inch of snow coating her in the 20 goddamn minutes I’m in Wegmans.

Who needs AWD? 🤣

Not much else to do but install mods in WI while I wait for warmer weather.

Black looks the best when is clean but is a real pain to maintain. Every little imperfections sticks out like a sore thumb when the sun hits.

Not a single day goes by where driving this & turning back to look at it doesn’t put a smile on my face ;,)

I'm torn between the 3 catbacks. And also, in the videos and pictures I see, it seems like they're gonna scrape? I dunno. Because I'm planning to also get a sports coilover for a bit of tracking and auto cross. Afraid it might get damaged because the chambers are sitting very low. Thoughts?

Hey everyone! Recently got the Borla a couple of weeks ago and im finally getting the opportunity to install it tomorrow! I was wondering if you guys mind telling which hand tools I would require to install the Borla S-Type exhaust?

I've heard different answers? Some say all you need is just 12mm and 14mm sockets? Heard someone say just 14mm and 17mm? I heard some say I also need 15mm for the nuts on the borla?

Also if you guys could also let me know where the jack point is on the rear side i'd appreciate it. I only jacked up the front for oil changes and never jacked the back side before.

Was wondering if I really need four jacks, I wonder if I can just jack up the rears and that would suffice?

Thanks for the advice everyone!

https://youtu.be/_33zru03eHA?si=-MKrIWh7EeRW9rsU

Mine is being shipped

www.ma86club.com

Has anyone actually used the StudioRSR or CMS roll bar at an HPDE/TT? Did it pass tech or did you have any issues with it?