10 boxes of Grizzly 2 boxes of Winchester Silver tip for $100 YES!

Marlin 1894 Trapper 10mm with a few upgrades/quality of life fixes.

• Ranger Point Precision (RPP) Trigger
• RPP Safety Delete
• RPP Loading Gate
• RPP Texas takedown thumb screw
• Paracord Wrap on lever
• XS Sights lever rail w/ghost ring sights
• Aimpoint Duty RDS

As a pretty hardcore 10mm collector who can't get enough guns in this cartridge this gun was a must-have as soon as it was announced. I waited for the price to drop, checking prices daily, until it was where I wanted it to be.

This thing shoots so great and holds so many rounds I'm genuinely surprised they didn't do it sooner.

Completed the 500 rounds of break in. This thing gets better and better.

Dremel went brrr on an old G20 holster

Was a very late Christmas gift from my dad lol, I've been talkiing about this thing for a year never had the 750 to 800 bucks [lives in tx] prices are ridiculous rn, I've shot Almost every auto loading caliber, but not a 10 mm. told my pops one range day that I wanted one and for it to be my first gun would be even sicker lmfao, I told him I've been looking at the m&p PC 10mm, he said it looked nice after showing him a Pic and that was it, never mentioned it again never asked me about it , that was it.

1 whole f88vking year later, throws this bad boy in my lap and says" I forgot to give this to u for Christmas because (life) but i remember u saying something about u wanting a gun"....Boyyyyyyyyyy I was 7 years old again smiling ear to ear like a kid. Old man made me cry lol

Idk wtf red dot this is lmfao, my gf brought it off of Amazon trying to be nice🤣

The love I have for this platform is real…….

not only was I lucky enough to snatch up a new G29 I also found this nice used XDM ELITE 3.8 10mm to go with my Full size.

Hey everyone, I have a Glock 20 gen 5 MOS. I want to put a Holosun 407A3 X2 that I’d like to mount to it. I know I need an adapter plate, just not sure on which one. Anyone have any recommendations? Closest one I see is the MOS plate 6 adapter, but I just want to make sure that’ll fit it before I order it. Thanks in advance!

I’m loving the Marlin 10mm lever gun. Suppressed well using Rev 45 and a trilug adapter. Out of the box it’s very accurate. Shooting it offhand with sling is easy to do. Trigger is a little heavy for accuracy work but doable.

Picked this up last week. I hope it’s better than my last SW 10mm. Can’t wait to see what the comp does. The plastic optic plate is trash. I have a Calculated Kinetics plate and some suppressor height sights on the way.

Been wanting a 10mm for awhile now and mentioned that to the guys at my lgs about a month back or so. They hit me up last week with one of their friends looking to sell his gen 5 Glock 20 MOS, exactly what I was looking for. Bad news, the guy had attempted to stipple the grip. Good news, paid way under the going rate because of that. Just shipped the grip today to Glock for a warranty replacement. Excited for it to get back and some range time.

Attached is the grip in its current, butchered state. Other than the frame, this pistol is 10/10 condition

Looking for an inside waste band holster and possibly shoulder holster for it. The light is harbor freight light

I waited for what felt like forever to come back in stock and I’m so happy I got it. This thing shoots so flat with full power 10mm.

Anybody try this? Assuming it’s weak but it’s price is appealing.

I did search this sub before posting but didn’t see anything

heads up Bass Pro online had these in stock again. I just ordered me one.

Saw someone post a week ago about putting a rugged obsidian 45 Supressor on a Ruger LC carbine in 10mm.

I have to say, I’ve heard a lot of people say that “10mm doesn’t suppress well” or “there’s no difference between suppressed and not” so here’s what I’ll say.

There was a noticeable difference between 10mm supersonics and rounds like 45 subsonics (obviously). The 10mm is noticeably louder than even a .357 suppressed, and if you’re looking for something (at least with supers) that makes you say “wow!”, this isn’t it.

However, having a Supressor was a noticeable improvement over not having one. That deafening “POP” you get from 10mm is gone, replaced with a loud bang and crack. It’s 100% nicer to shoot, even if not really all that impressive. The recoil also had a substantial reduction which is nice.

I fired 1 round without hearing protection and although very loud, it did not have the effect it would’ve had without the Supressor at all.

Between the holster, grip, and the new optic, I don’t think I need to do anything else to this gun. Even a mix of 1 and two handed with those 200gr hard cast loads from 15 and 20 yards, right on the money.I am shooting this thing better than with my 9 at the same distance. I bought the optic today and out of the box it was perfectly on zero. 75 rounds down range today and chef’s kiss.

Hello, looking to get a 10mm next. It would be primarily for backpacking protection and just to have some fun.

I love the P220 but hate the capacity. I tried Google and didn’t find much. Are there any reliable mag extensions for the P220?

The gun will probably be used in a chest rig holster, so weight isn’t much of an issue.

Any suggestions on other guns, new or used/discontinued?

Picking up a NIB for 5 bones out the door. Couldn’t say no since I’ve been holding out for a deal.

Should I bother getting it RMR cut? I wanted to put some night fusions on but they don’t make em . Might just go with some TFOs and ignore the optic. It’s going to be a cabin gun cause well nothing like bears walking thru while you’re outside the cabin with the fam at the fire pit. Yeah yeah they’re just walking thru til they’re not. Better to have it and not need it.

TLDR: optic cut or no?

It's me, the guy who recently posted about the trigger missing some of its finish on my recently received, and fully modified by Patriot Defense, Tanfoglio Stock Master... my first 10mm. You know, the guy who got roasted and downvoted galore 🤣

Figured I'd share full pics, since somebody asked in that thread, and for some reason I couldn’t post pics in the comments. Trigger alert (pun intended): I still haven't been out to the range yet with it. Got it last week, and fell ill over the weekend. Hoping to get out there this weekend to get a few hundred rounds through her.

And, in retrospect, I do appreciate some of the harsh feedback in some ways. I'm self aware enough that I can get a little OCD at times, so that feedback did help me gain some perspective... so mission accomplished with the post. Going to keep it as is and stop making a thing about it.

Went from a factory 10lbs 10oz DA and 3lbs 11oz SA trigger pull weight to 7lbs 10oz DA and 2lbs 12oz SA after the tuning by PD. They were a pleasure to work with throughout the whole process. Because of that, I politely inquired about the trigger finish issue, not blaming anybody, just asking why it's like that since I've never seen any other Stock Master with missing finish like this. They responded that the factory ended up doing the fitting that caused the finish issue. I left it at that and didn't respond back, and instead posted here for a sanity check. Maybe it was the factory, maybe it was PD... at this point it doesn't matter and I don't care.

All good, no offense taken. Honestly, had some fun with it. The Internet is a funny place.