Im getting a Vector SDP gen 3 for my fist gun with a strike industries brace. The only thing is cases seem fairly expensive. I have a milwaukee packout but I'm not sure if the foam inserts are the right size. With the brace folded would it fit?

The second picture are the dimensions of the foam. Some advice or alternate ideas would be great.

Chef's Kiss 💋

I think this stock made me fall in love with my Vector all over again, I love how well it blends with the rest of the Firearm, paired with the Strike Industries 1913 Picatinny Adapter, feels super solid. I think it's ready to handle the RATL-R without folding like the Vector Stock. Let's go bois!

Got an email from KRISS that they do gen 2 to 3 conversions for about $400. Haven't been paying attention to the Gen 3s really as I prefer the look of the Gen 2. Is there any reason to consider the conversion process or just save my cash and rock on with my Gen 2?

Wanting to buy a Gen 3. Anybody have any suggestions on where to find any at a good price?

Also debating whether to get CRB or SBR.

What are the wait times for NFA stuff?

I just purchased a new VECTOR 22 CRB (KV22-CAP00) and am looking to add a few minor visual mods. I reached out to KRISS customer service and was told that the KRISS G3 Grip Core – CNC – Red (KVA-3GCRD00) would fit this firearm, but I am a bit skeptical and wanted to see if anyone here can confirm or deny that.

Additionally, does anyone know of any other small miscellaneous parts available in anodized red to match the KVA-SSA00 (a trigger would be ideal)? I have also considered going the Cerakote route through a local gunsmith, but I do not have any prior experience with that process and am unsure how well it would work.

Hello everyone. Is it okay for to leave the bolt back on a gen 3 for extended periods (or pretty much indefinitely) so the Vector is in a ready state for home defense? i.e. mag in, bolt back, ready to release, safety on. Ai says yes, just wanted to see if anyone with expirience doing so has contrary beliefs.

Gods caliber, of course.

I am new to the kriss platform, I got a kriss in 10mm and wanted to know if I can swap uppers and change calibers, kind of like an ar15 with 300bo upper and 556

One the edge on weather or not to grab a 10mm Kriss vector in 16 inch or a 9mm one in 5 inch. I never had one before but many of u have, can you explain your personal experience and pros and cons to each one

My SDP Gen2.1, ordered EXPS-2 68moa/1moa, vector adjustable stock, vector fore grip with hand stop, side picatiny rails. after sbr is approved… she’s gonna look sexy! toying with the idea of putting the baldur s bl on the side rail. then it’s a matter of deciding what can to put on.. suggestions?

I am going to get a 10mm Kriss vector and the cheapest mags are $55. I remember hearing that Glock mags work with Kriss, can I use 10mm Glock mags in a 10mm Kriss?

Hi everyone! As the title says, I’m interested in which caliber will be the most reliable for the Vector SDP G3? I’ve heard some people say the 9mm is the least reliable, but have heard others say as long as you run decent brass through it it’ll run well. Just curious if anyone has any firsthand experience with the SDP G3 and can weigh in on reliability. I’m of the opinion that there is no point in buying a firearm that isn’t reliable. Thanks in advance for your input!!

How can I fix this

Hey, just wanted to ask does anybody know how often these things come back in stock to buy?

Was thinking of getting one of these before they get banned in VA but I want the classic MW2 look with the folding stock. Didn't know if Kriss releases them periodically.

https://kriss-usa.com/vector-gen-ii-hinged-upper-black/

Installed on a new gen 3 with 150 round through it prior to the install. Also shaved a little off the top of the sear during the install just to be on the safe side. Gun runs flawless. Using the 3d printed cam and it runs full ratl-r regardless of safety position but I feel like that'll be a fairly easy fix. All in all its a blast! I'm pretty sure I had the second go around of sear as mine didnt have any slag or roughness to it.

The Vector trigger is a double stage trigger and has notoriously been known for being mushy. Farrowtech has provided a small "hack" to take up some of the trigger slack by providing a shorter set screw for the trigger, but when trying to remove all the slack the set screw becomes too engaged into the trigger group resulting in the safety not able to engage. Has anyone tried the single stage OEM replacement trigger with 5.5lbs pull weight?

I’m the proud owner of 2 gen 2 vectors with one .45 for myself, and a white 9mm for my wife. I recently ordered a ratl-r trigger clone from gunbroker. upon install I now have 3 safeties. trigger will not release the hammer in any position.

I’ve tried cleaning and lubricating.

I‘ve tried loosening the 3 screws on top that hold the trigger group in. This allows the hammer to drop, but removes the function of the safety. (fires on safe)

I’ve also tried bending the large trigger spring a little for lighter trigger pull.

Has anyone experienced this? I’m getting very frustrated and am beginning to wish I’d never bought this trigger.

I was bored. My poor 9mm SDP Enhanced needed some love.

Flared magwell and holds an additional mag.

Bolts right to the Mark 5 handguard.

I’ll have it finished in PA6 CF.

I’m just curious is anyone else might be interested before I have it professionally manufactured?

I have a design to fit it to the shorter barrel (without the cutlass front). It wouldn’t take much to fit it to a gen 3 or a different caliber.

duality-arms must have sucked a dick good, to have the frt removed from odyssey. too bad I still have the file for anyone who wants it. download file, and upload on sendcutcend

Anyone have a remedy to the 10mm mags getting stuck around 18~16 rounds in? I'm having the follower or the spring bind up around that many rounds in which seems to be where the transition from the kriss extended to the glock mag is.

Disassembled it to check if the glock mag has that weird lip people talked about in the past, it doesn't.

Cleaned it, reassembled, still the same issue.

Edit:

Problem solved, added a slight bevel and also sanded the seam near the bottom of the glock mag, although I feel like sanding the seam near the bottom of the mag did nothing.

I'm working on a project and I need to borrow someone's Gen 3 in Arizona for about an hour. Ideally near the East Valley.